Highway Pegs on the Cheap

Make yourself comfortable without spending a bundle


Rating: 0.00/5 (0 votes cast)

Gadget note: If you don't want to spend the big $$ for highway pegs, there's a cheap (really cheap!) alternative...

Attention Classic owners. Have you replaced your stock passenger pegs with floorboards? Well, don’t throw away those pegs, because they do have a purpose.

What you need:

  1. Stock passenger pegs. If you don’t have them anymore, you probably know someone who has a pair in their garage gathering dust. I’ve even seen them on Ebay for $1
  2. (2) 3 piece (Custom Chrome) frame clamps. In my case I bought 1 ¼” clamps for my Cobra highway bar. Measure your own 'engine protector' bar to determine the clamp size you will need. The clamps can be bought at any bike shop, and are listed in J&P Cycles for $5.99 each (part # 7000125).

How to:

Installation doesn’t get easier than this: Attach the clamp on the highway bar. Use the stock peg and nut to hold it all together, and you’re done!!!! This is a really cheap mod, and even though the peg isn’t chrome, it only cost you $12 and 20 minutes of your time….

cheappegs1 cheappegs2 cheappegs3

Share It

Be the first to comment